Metalworking - Deburring Brushes

About Metalworking - Deburring Brushes

Sheet material Sheet material is cut into the desired shape using laser cutters, but this process creates burrs on the cut surfaces and these burrs need to be removed. In addition, the total surface may require satinising.

Various types of stainless steel, steel and aluminium are processed by sanding (for surface smoothness) and deburring. In addition to removing the burrs, our machines and brushes make a radius on any edge and the surface is satinised for surface roughness (adhesion).

Pipes and tubes The burrs produced on both the exterior and interior of mouldings when pipes and tubes are cut to length or saw cut at the required angle need to be removed. Cosma develops and produces brushes for this application and integrates these brushes into deburring machines. Disc brushes are often used for deburring plastic and metal (steel, stainless steel, aluminium) mouldings.

Extrusion In some cases, surfaces require processing post-production in order to meet aesthetic and technical requirements. Extrusion and deburring are a good example of this. Cosma sanding products can solve this problem immediately on both plastic and metal surfaces.

In most processes, a satinising or deburring brush creates even lines across the length in the extrusion direction of aluminium or composite material.

This processing alters the surface roughness and thereby the visual and technical aspects of the product, for example by creating adhesion or removing contamination.

Keywords

• Aluminium
• Brush Technology
• Burr Removal
• Custom Made
• Deburring
• Export
• Machine Builder
• Metalworking
• Sheet Metal
• Steel
• Surface Treatment

Address

• Headquarters

  Fahrenheitstraat 8a6003DC WeertLimburg, Netherlands