Core PTFE and Bronze Bearings

About Core PTFE and Bronze Bearings

Core Bearings PTFE sliding plates Core PTFE low friction sliding bearings will support pipelines or mechanical contructions and allow unlimited displacements caused by temperature elongation.

Due to the low friction coefficient the material stress is reduced to a minimum.

The Core PTFE bearings are of a compact design and can be easily fit into any construction.

The bearings generally operate under high loads ans slow sliding velocity.

Core Bronze Bearings

Flat sliding bearings can be mounted by means of a bolt connection. Flat sliding bearings which are mounted by means of a bolt connection can be used on sliding bearings to realize a slide where welding is not possible. If the temperature is higher than 200 ° C, and the built-in height is limited, there may be chosen for bearings in various bronze alloys with graphite. The temperature range extends to approximately 450 ° C, depending on the load per mm ². The bearing is easy to place, and is connected by means of bolts on the structure. The bearings are supplied without the required counter bearing.

Keywords

• Bearings
• Bronze Bearings
• Pipe Supports
• Ptfe Bearings
• Sliding Plates

Address

• Headquarters

  HengeloOverijssel, Netherlands