Micro Milling Tools

Over Micro Milling Tools

Micro Milling Tools.

Dutch Diamond Technologies developed a range of high quality cylindrical milling tools for cutting intraocular implants and micro structures.

Availability: From Ø0.35mm cutting diameter and larger Working Length 2x cutting diameter Shank dimension standard Ø3.0mm Other dimensions on request.

Benefits: Tool life 10,000 – 15,000 IOL Lenses Dramatic reduction of machine (at least 150 times less) downtime in replacing conventional cutters Higher accuracy Superior surface finish, less polishing Perfectly balanced.

Recommendations: Our IOL diamond milling tools can be used on PMMA and foldable materials, fixed with wax, vacuum or ice. Only use on machines with air bearings and with a spindle which is perfectly balanced. Not recommended for drilling. Theoretically it is possible, but because of possible problems with chip-congestion the tool can break. So therefore always ramp down in material at an angle.

Cutting parameters: Milling at normal temperature. The feed (mm/min) should not exceed the spindle speed (RPM) divided by 1000 (example: RPM 40,000 then feed maximum 40mm/min) Milling in freezing device: The feed (mm/min) should not exceed the spindle speed (RPM) divided by 300 (example: RPM 40,000 then speed maximum 130mm/min).

For more information: https://www.dd-technologies.com/products/iol-milling-tools/

Adres

• Hoofdkantoor

  KovelCuijkNoord-Brabant, Nederland